document number: 89149 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 19-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 smd photovoltaic solar cell protection rectifier s5pms vishay general semiconductor new product features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? glass passivated chip junction ? low forward voltage drop ? high forward surge capability ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? halogen-free according to ie c 61249-2-21 definition typical applications for use in solar cell panel blocking diode for protection, using dc forward current without reverse bias. mechanical data case: to-277a (smpc) molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs compliant, and commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test notes (1) mounted on 30 mm x 30 mm al pcb (2) free air, mounted on recommended copper pad area (3) meets the requirements of iec 61 215 ed. 2 bypass diode thermal test primary characteristics i f(av) 5.0 a v rrm 1000 v i fsm 100 a i r 10 a v f at i f = 5.0 a 0.90 v t j max. 150 c to-277a ( s mpc) anode 1 anode 2 cathode k k 2 1 e s mp ? s eries maximum ratings (t a = 25 c unless otherwise noted) parameter symbol s5pms unit device marking code 5pms maximum repetitive pe ak reverse voltage v rrm 1000 v maximum dc forward current (fig. 1) t m = 130 c i f 5.0 (1) a t a = 25 c 1.8 (2) peak forward surge current 10 ms single ha lf sine-wave superimposed on rated load i fsm 100 a operating junction and storage temperature range t op , t stg - 55 to + 150 c junction temperature in dc forward current without reverse bias, t ? 1 h (3) t j ? 200 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89149 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 19-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 s5pms vishay general semiconductor new product notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms notes (1) free air, mounted on recommended copper pad area. thermal resistance r ? ja - junction to ambient (2) mounted on 30 mm x 30 mm al pcb thermal resistance r ? jm - junction to mount ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve notes (1) mounted on 30 mm x 30 mm al pcb t m measured at the terminal (r ? jm = 3.0 c/w) (2) free air, mounted on recommended copper pad area (r ? ja = 90 c/w) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage i f = 2.5 a t a = 25 c v f (1) 0.94 - v i f = 5.0 a 0.99 1.15 i f = 2.5 a t a = 125 c 0.82 - i f = 5.0 a 0.90 1.00 reverse current rated v r t a = 25 c i r (2) -10 a t a = 125 c 55 100 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 2.5 - s typical junction capacitance 4.0 v, 1 mhz c j 30 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol s5pms unit typical thermal resistance r ? ja (1) 90 c/w r ? jm (2) 3 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode s5pms-m3/86a 0.10 86a 1500 7" diam eter plastic tape and reel s5pms-m3/87a 0.10 87a 6500 13" diam eter plastic tape and reel ambient temperature (c) 6.0 4.0 0 075150 dc forward current (a) 25 100 1.0 50 125 2.0 5.0 3.0 t a = 25 c (2) t m = 130 c (1)
document number: 89149 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 19-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 s5pms vishay general semiconductor new product fig. 2 - forward power loss characteristices fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical j unction capacitance d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0 average forward current (a) 6.0 0 036 average power lo ss (w) 14 1.0 25 3.0 2.0 4.0 d = t p /t t p t 5.0 t a = 150 c t a = 125 c t a = 25 c in s tantaneou s forward voltage (v) 100 0.01 0.4 0.7 1.5 in s tantaneou s forward current (a) 0.5 1 0.6 1.0 1.4 0.1 10 0.9 0.8 1.3 1.2 1.1 percent of rated peak rever s e voltage (%) 1000 0.01 10 40 100 in s tantaneou s rever s e current (a) 20 10 60 100 1 0.1 80 t a = 150 c t a = 125 c t a = 25 c 50 30 70 90 rever s e voltage (v) 100 10 0.1 100 junction capacitance (pf) 110 t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 89149 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 19-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 s5pms vishay general semiconductor new product package outline dimensions in inches (millimeters) conform to jedec to-277a to-277a ( s mpc) 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) nom. 0.084 (2.13) nom. 0.155 (3.94) nom. mountin g pa d layout 0.268 (6.80) 0.186 (4.72) min. 0.050 (1.27) min. 0.041 (1.04) 0.055 (1.40) min. 0.189 (4.80) min. 0.187 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.171 (4.35) 0.167 (4.25) k 2 1
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
